ขอถามพี่เล็กหน่อยครับ คือว่าเท่าที่อ่านมาเรื่องการปรับแต่งแม็กกาซีนปืนของ PRO dv. สามารถทำได้แต่ต้องใส่แค่ 15นัด
ผมเลยเอารูปมาถามพี่เพื่อความแน่ใจ
คือแม็กมันพังน่ะครับ ปีกฉีก เลยซ่อม แล้วเอาไว้ใช้ซ้อม ตอนนี้ เหลือแม็กดีๆ อยู่แค่ 3 ตัว
ช่วงนี้เบี้ยน้อยหอยน้อย
เลยกะว่าจะเอาอันนี้มาใช้แข่งด้วยน่ะครับ อย่างนี้ได้แน่นะครับพี่ ผมถามไว้ก่อน ไม่อยากให้ RO ปวดหัว
QUOTE (Ramunas Binkevicius @ 4 Nov 2009, 05:46 am)
Does it mean that: You can't use aftermarket base pads on OFM mags? It is allowed to use them on aftermaket mags only?
Correct.QUOTE (Bob Ariyamitr @ 4 Nov 2009, 11:21 am)
You are allowed to modify OFM mags and AM mags as you wish.
Incorrect. Point 19.1 of the PD Rules has not changed. We only changed Point 19.2 and 20.1. See post #438 in this thread.
LATE EDIT: The legality of drilling a witness hole at the 15 round limit in OFM mags is arguable. However, as PD rules allow "identifying marks which add or remove negligible weight to/from magazines", I'm inclined to deem the action legal, as it simplifies checking for all concerned, without going against the spirit of the rules.
As y'all can see, I'm becoming a kinder, gentler ass as my years advance towards Thuper Thenior......
--------------------
Vince Pinto
IPSC Handgun Rules Director ขอยกคำตอบของ Vince ที่เคยตอบไว้ใน GV IPSC นะครับ สรุปว่าอนุโลมให้เฉพาะการเจาะรูที่แม็กฯเดิมจากโรงงาน เพื่อการแสดงตำแหน่งของกระสุนนัดที่ 15 เท่านั้น ไม่ใช่กรณีอื่นๆซึ่งยังห้ามอยู่ในกฏข้อนี้เดิม จากการยึดส้นแม็กฯด้วยสกรูดังภาพ ไม่สามารถรับรองได้ว่าเป็นการเพิ่มน้ำหนักให้ส้นแม็กฯ (สมมุติสกรูเป็นทังสเตนล่ะ) ทำให้แม็กฯหนักขึ้นและหล่นเร็วขึ้น ซึ่งเข้าข่ายต้องห้ามตามกฏ ห้ามใช้ครับ หากยังหาอะไหล่ส้นแม็กฯใหม่ไม่ได้ หาทางยึดด้วยเทปสองหน้าแน่นๆ หรือกาว เข้ากับตัวแม็กฯโดยไม่เห็นร่องรอยการ Modification ดีกว่าครับ ไม่เคยมีการอนุโลมว่าปรับแต่งได้ตามใจชอบนะครับ
ส่วนอีกข้อข้างต้น แม้แต่การอนุโลมให้ใช้ส้นแม็กฯผลิตภายหลังเพื่อเพิ่ม 2 นัด ก็ห้ามใช้กับกับแม็กฯเดิมๆผลิตจากโรงงานผู้ผลิต (OFM) แต่ให้ใช้กับแม็กฯซึ่งผลิตภายหลัง (AM) ด้วยกันเท่านั้น รายละเอียดเพิ่มเติมมีดังนี้ครับ
QUOTE (Roger Tiensuu @ 4 Nov 2009, 02:47 am)
Yes Juan Carlos, today it's not OK, but 1st of Jauary 2010 it is OK in Production division to drill witness holes or whatever holes you need on your mags..
Not on OFM mags. Point 19.1 of the PD Rules has not changed. We only changed Point 19.2 and 20.1, which means:
1. You can use longer, OFM optional mags (e.g. G17 mags in a G19, but you're limited to 15 rounds loaded); and/or
2. You can use OFM +2 baseplates; and/or
3. AM mags no longer need to match dimensions of OFM mags -- there's just subject to the same 15 rounds loaded limitation.
It didn't suddenly become open season in PD for Home Hackers. We just relaxed some previous restrictions while introducing the loading limit. The end result is:
4. 90% of the guns on the approved gun list become round-count competitive; and
5. People no longer need to spend $$$ buying AM mags, just so that they can fiddle with them to squeeze in an extra round or two; and
6. Guns typically sold in some markets with +2 basepads (e.g. Philippines) no longer need to have them replaced with +0 basepads.--------------------
Vince Pinto
IPSC Handgun Rules Director[/color]